Hpe5022_Ber_Selectpattern_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_selectPattern_Q

C Syntax ViStatus hpe5022_BER_selectPattern_Q(ViSession id, ViPInt16 pat);
Visual Basic hpe5022_BER_selectPattern_Q(ByVal id As Long, ByRef pat As Integer) As
Syntax Long
Description
This function returns the selected data pattern for bit error measurement by
"hpe5022_BER_selectPattern" function.
Parameters • id
Description
Direction
• pat
Description
Direction
Values
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NOT_INIT
See Also "hpe5022_BER_selectPattern" on page 31
Chapter 3
BER Data Pattern Definition Function
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the selected data pattern for bit error measurement.
OUT
Same as 'pat' parameter in the
"hpe5022_BER_selectPattern" function.
Description
No Error
Description
The handle specified by 'id' is invalid.
The resource of Agilent E5039A/B can not be
opened during initialization. Check if Agilent
E5039A/B is included in the rsrcArray of the
"hpe5022_init" function.
Function Reference
33