Table of Contents
Advertisement
hpe5022_BER_optimize
C Syntax
ViStatus hpe5022_BER_optimize(ViSession id);
Visual Basic
hpe5022_BER_optimize(ByVal id As Long) As Long
Syntax
Description
This function performs an optimization of BER. The selected categories by the
"hpe5022_BER_optimizeState" function are optimized. The
"hpe5022_BER_optimizeSequenceConfig" function allows you to perform an
erase and a write sequence before the optimization.
Parameters
• id
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_EXCESS_TRACK_DATA
hpe5022_ERROR_HARD_HAMP
hpe5022_ERROR_INV_ID
hpe5022_ERROR_INV_SETUP
hpe5022_ERROR_INV_DRIVE_CONDITION
hpe5022_ERROR_OPT_FAIL
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Description
No Error
Description
The data overflow a track at one
revolution at the bit error
measurement. Change the setting of
the user data rate, rpm , track
number, track format or sector
format.
Hardware error is detected in the
head amplifier.
The handle specified by 'id' is
invalid.
Sequence type and category setting is
invalid. Change the sequence type or
category.
"
precompensation must be turned off.
The spinstand drive is turned off.
Turn it on before executing this
function. See the
"hpe5022_driveState" function.
The optimization is failed. All sector
is lost.
Function Reference
Optimization Function
When the
hpe5022_SEQ_M" is selected, the
129
Advertisement
Table of Contents
