Hpe5022_Ber_747Config_Q - Agilent Technologies E5022B Programming Manual

Function Reference
747 Measurement Function

hpe5022_BER_747Config_Q

C Syntax ViStatus hpe5022_BER_747Config_Q(ViSession id, ViPInt16 old_pat, ViPReal64
old_pos, ViPInt16 adj_pat, ViPInt32 trk_prof_size, ViPReal64 trk_prof_range,
ViPInt16 trk_prof_ave);
Visual Basic hpe5022_BER_747Config_Q(ByVal id As Long, ByRef old_pat As Integer,
Syntax ByRef old_pos As Double, ByRef adj_pat As Integer, ByRef trk_prof_size As
Long, ByRef trk_prof_range As Double, ByRef trk_prof_ave As Integer) As Long
Description This function returns the 747 test configuration specified by the
"hpe5022_BER_747Config" function.
Parameters • id
• old_pat
• old_pos
• adj_pat
• trk_prof_size
• trk_prof_range
• trk_prof_ave
200
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description Returns the old data pattern.
Direction OUT
Description Returns the write offset position where the old data pattern is
written.
Direction OUT
Description Returns the data pattern of the adjacent track.
Direction OUT
Description Returns the number of points for track profile measurement.
Direction OUT
Description Returns the list of track offset range for track profile
measurement.
Direction OUT
Description Returns the average count of track profile measurement.
Direction OUT
Chapter 3