747 Measurement Function; Hpe5022_Ber_747Config - Agilent Technologies E5022B Programming Manual

747 Measurement Function

hpe5022_BER_747Config

C Syntax ViStatus hpe5022_BER_747Config(ViSession id, ViInt16 old_pat, ViReal64
old_pos, ViInt16 adj_pat, ViInt32 trk_prof_size, const ViReal64 trk_prof_range,
ViInt16 trk_prof_ave);
Visual Basic hpe5022_BER_747Config(ByVal id As Long, ByVal old_pat As Integer, ByVal
Syntax old_pos As Double, ByVal adj_pat As Integer, ByVal trk_prof_size As Long,
ByRef trk_prof_range As Double, ByVal trk_prof_ave As Integer) As Long
Description This function configures the 747 test. The of old track pattern, its position, track
profile measurement configuration are specified in this function. The
"hpe5022_BER_measure747" or "hpe5022_BER_setup747" function performs
the 747 measurement.
Parameters
• id
Description
Direction
• old_pat
Description
Direction
Preset Value
Values
• old_pos
Description
Direction
Preset Value
Values
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Specifies the old data pattern.
IN
h
pe5022_BER_PAT_2
Same as 'pat' parameter in the
"hpe5022_BER_selectPattern" function.
Specifies the write offset position where the old data pattern
is written.
IN
-6
1.0´10
Name
hpe5022_TRACK_OFFSET_MIN
hpe5022_TRACK_OFFSET_MAX
Function Reference
747 Measurement Function
Value
-6
-6.0´10
-6
6.0´10
197