Table of Contents
Advertisement
Function Reference
Bit Error Rate Measurement Function
hpe5022_BER_errorBitPerByte
C Syntax
ViStatus hpe5022_BER_errorBitPerByte(ViSession id, ViReal64 bit);
Visual Basic
hpe5022_BER_errorBitPerByte(ByVal id As Long, ByVal bit As Double) As
Syntax
Long
Description
This function specifies the number of error bits per byte. Agilent E5022/E5023
compares the bit stream by a byte and counts the bytes where an error has
occurred. This value is used for bit error rate calculation. See the
"hpe5022_BER_ber_Q" function.
Parameters
• id
• bit
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_INV_PARAMETER
hpe5022_ERROR_NOT_INIT
See Also
"hpe5022_BER_errorBitPerByte_Q" on page 109
138
Description
Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction
IN
Description
Specifies the number of error bits per byte.
Direction
IN
Preset value
hpe5022_BER_ERROR_BITS_PER_BYTE_MIN (1)
Values
Name
hpe5022_BER_ERR_BITS_PER_BYTE_MIN
hpe5022_BER_ERR_BITS_PER_BYTE_MAX
Description
No Error
Description
The handle specified by 'id' is invalid.
The parameter 'bit' is out of range.
The resource of Agilent E5039A/B can
not be opened during initialization. Check
if Agilent E5039A/B is included in the
rsrcArray of the "hpe5022_init" function.
Value
1
9
Chapter 3
Advertisement
Table of Contents
