Table of Contents
Advertisement
Function Reference
Channel IC Configuration Function
hpe5022_BER_channelIcLowPassFilter
C Syntax
ViStatus hpe5022_BER_channelIcLowPassFilter(ViSession id, ViReal64 fc,
ViReal64 boost);
Visual Basic
hpe5022_BER_channelIcLowPassFilter(ByVal id As Long, ByVal fc As Double,
Syntax
ByVal boost As Double) As Long
Description
This function specifies the cut-off frequency and boost gain of the low pass filter in
the channel IC.
Parameters
• id
• fc
• boost
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NOT_INIT
See Also
"hpe5022_BER_channelIcLowPassFilter_Q" on page 58
84
Description
Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction
IN
Description
Specifies the cut-off frequency of the low pass filter.
Direction
IN
Unit
Hz
Description
Specifies the boost gain of the low pass filter.
Direction
IN
Unit
dB
Description
No Error
Description
The handle specified by 'id' is invalid.
The resource of Agilent E5039A/B can
not be opened during initialization. Check
if Agilent E5039A/B is included in the
rsrcArray of the "hpe5022_init" function.
Chapter 3
Advertisement
Table of Contents
