Hpe5022_Ber_Setuptrackprofile - Agilent Technologies E5022B Programming Manual

hpe5022_BER_setupTrackProfile

C Syntax ViStatus hpe5022_BER_setupTrackProfile(ViSession id, ViInt16 seqType, ViInt16
measFunc, ViInt16 points, const ViReal64 range, ViInt16 ave, ViPObject
testHndl);
Visual Basic hpe5022_BER_setupTrackProfile(ByVal id As Long, ByVal seqType As Integer,
Syntax ByVal measFunc As Integer, ByVal points As Integer, ByVal range As Double,
ByVal ave As Integer, ByRef testHndl As Long) As Long
Description This function assigns the BER track profile measurement sequence to the specified
test identifier. See the "hpe5022_BER_measureTrackProfile" function for details
of the sequence. This function does not execute the measurement. Measurement is
executed by the "hpe5022_measure" function with the test identifier specified in
this function.
The "hpe5022_BER_trackProfileData_Q" function returns the measurement result
Parameters • id
Description
Direction
• seqType
Description
Direction
Values
• measFunc
Description
Direction
Values
• points
Description
Direction
Values
• range
Description
Chapter 3
Bit Error Rate Track Profile Measurement
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Selects the type of measurement sequence.
IN
Same as 'seqType' parameter in the
"hpe5022_BER_measureTrackProfile" function.
Specifies the type of measurement.
IN
Same as 'measFunc' parameter in the
"hpe5022_BER_measureTrackProfile" function.
Specifies the number of track offset points to be measured.
IN
Same as 'points' parameter in the
"hpe5022_BER_measureTrackProfile" function.
Specifies the read track offset range. The read track offset
will be set from -range to +range by a step of
(2 ´ range/(points-1)).
Function Reference
175