Hpe5022_Ber_Usersyncpatternstate_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_userSyncPatternState_Q

C Syntax ViStatus hpe5022_BER_userSyncPatternState_Q(ViSession id, ViPBoolean state);
Visual Basic hpe5022_BER_userSyncPatternState_Q(ByVal id As Long, ByRef state As
Syntax Integer) As Long
Description
This function returns the state of the user-defined synchronized pattern. This
function is only available for use with the E5039C bit error test module.
Parameters • id
Description
Direction
• state
Description
Direction
Values
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_NSUP_FUNC
See Also "hpe5022_BER_userSyncPatternState" on page 58"
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the state of the user-defined synchronized pattern.
OUT
Name Value
VI_TRUE 1
VI_FALSE 0
BER Data Pattern Definition Function
Description
The user-defined synchronized pattern specified by
hpe5022_BER_userSyncPattern function is enable.
The user-defined synchronized pattern specified by
hpe5022_BER_userSyncPattern function is disable
Description
No Error
Description
The handle specified by 'id' is invalid.
The resource of Agilent E5039C can not be
opened during initialization. Check if the
Agilent E5039C is included in the rsrcArray
of the "hpe5022_init" function.
This function is not supported by the
module currently in use.
Function Reference
.
59