Hpe5022_Ber_Errorthreshold - Agilent Technologies E5022B Programming Manual

hpe5022_BER_errorThreshold

C Syntax ViStatus hpe5022_BER_errorThreshold(ViSession id, ViReal64 errThreshold);
Visual Basic hpe5022_BER_errorThreshold(ByVal id As Long, ByVal errThreshold As
Syntax Double) As Long
Description
This function specifies the threshold BER. This value affects the bath tub and 747
measurements. This function is only available for use with the E5039C bit error
test module.
Parameters • id
Description
Direction
• errThreshold
Description
Direction
Preset Value
Values
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_INV_ID
hpe5022_ERROR_INV_PARAMETER
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Specifies the threshold BER. The error counting sequence is
discontinued when the BER reaches this threshold. If this
value is set to hpe5022_BER_ERROR_THR_MIN, the BER
threshold is infinity.
IN
(hpe5022_BER_ERROR_THR_MIN)
Name
hpe5022_BER_ERROR_THR_MIN
hpe5022_BER_ERROR_THR_MAX
Function Reference
Bit Error Rate Track Profile Measurement
Value
0
1
Description
No Error
Description
The resource of Agilent E5039C can not
be opened during initialization. Check if
the Agilent E5039C is included in the
rsrcArray of the "hpe5022_init" function.
The handle specified by 'id' is invalid.
The parameter 'errThreshold' is out of
range.
187