Hpe5022_Ber_Channeliclowpassfilter_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_channelIcLowPassFilter_Q

C Syntax ViStatus hpe5022_BER_channelIcLowPassFilter_Q(ViSession id, ViPReal64 fc,
ViPReal64 boost);
Visual Basic hpe5022_BER_channelIcLowPassFilter_Q(ByVal id As Long, ByRef fc As
Syntax Double, ByRef boost As Double) As Long
Description This function returns the cut-off frequency and boost gain of the low pass filter in
the channel IC.
Parameters • id
Description
Direction
• fc
Description
Direction
Unit
• boost
Description
Direction
Unit
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NOT_INIT
See Also "hpe5022_BER_channelIcLowPassFilter" on page 57
Chapter 3
Channel IC Configuration Function
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the cut-off frequency of the low pass filter.
OUT
Hz
Returns the boost gain of the low pass filter.
OUT
dB
Description
No Error
Description
The handle specified by 'id' is invalid.
The resource of HP E5039A is not
opened at initialize. Check if the HP
E5039A is included in the rsrcArray of
the "hpe5022_init" function.
Function Reference
85