Hpe5022_Ber_747Datasize_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_747DataSize_Q

C Syntax ViStatus hpe5022_BER_747DataSize_Q(ViSession id, ViPInt32 size);
Visual Basic hpe5022_BER_747DataSize_Q(ByVal id As Long, ByRef size As Long) As Long
Syntax
Description
This function returns the array size of 747 test returned by the
"hpe5022_BER_747Data_Q" function.
Parameters • id
Description
Direction
• size
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_DATA_CORRUPT
hpe5022_ERROR_NOT_INIT
See Also "hpe5022_BER_measure747" on page 152
"hpe5022_BER_setup747" on page 155
"hpe5022_BER_747Data_Q" on page 158
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the 747's test data size.
The size will be the same as the value of 'point' specified by
the "hpe5022_BER_measure747" or
"hpe5022_BER_setup747" function if measurement is done
properly.
OUT
Description
No Error
Description
The handle specified by 'id' is invalid.
The 747 measurement data is corrupt.
Check if your measurement sequence is
correct.
The resource of HP E5039A is not opened
at initialize. Check if the HP E5039A is
included in the rsrcArray of the
"hpe5022_init" function.
Function Reference
747 Measurement Function
207