Hpe5022_Ber_Writegate_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_writeGate_Q

C Syntax ViStatus hpe5022_BER_writeGate_Q(ViSession id, ViPReal64 trigDelay,
ViPReal64 aperture);
Visual Basic hpe5022_BER_writeGate_Q(ByVal id As Long, ByRef trigDelay As Double,
Syntax ByRef aperture As Double) As Long
Description This function returns the write gate delay and aperture time. This function is only
available for use with the E5039C bit error test module.
Parameters • id
Description
Direction
• trigDelay
Description
Direction
• aperture
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NSUP_FUNC
See Also
"hpe5022_BER_writeGate" on page 69"
Chapter 3
BER Data Pattern Definition Function
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the write gate delay time in seconds.
OUT
Returns the write gate aperture time in seconds.
OUT
Description
No Error
Description
The resource of Agilent E5039C can not
be opened during initialization. Check if
the Agilent E5039C is included in the
rsrcArray of the "hpe5022_init" function.
The handle specified by 'id' is invalid.
This function is not supported by the
module currently in use.
Function Reference
71