Hpe5022_Ber_Burstthreshold_Q - Agilent Technologies E5022B Programming Manual

Function Reference
Bit Error Rate Measurement Function

hpe5022_BER_burstThreshold_Q

C Syntax ViStatus hpe5022_BER_burstThreshold_Q(ViSession id, ViPInt16 length,
ViPInt16 counts);
Visual Basic hpe5022_BER_burstThreshold_Q(ByVal id As Long, ByRef length As Integer,
Syntax ByRef counts As Integer) As Long
Description This function returns the burst length threshold parameters. This function is only
available for use with the E5039C bit error test module.
Parameters • id
• length
• counts
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NSUP_FUNC
See Also "hpe5022_BER_burstThreshold" on page 144"
146
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description Returns the burst length threshold in bytes.
Direction OUT
Values Same as 'length' parameter in the
"hpe5022_BER_burstThreshold" function.
Description Returns the burst error count threshold.
Direction OUT
Values Same as 'counts' parameter in the
"hpe5022_BER_burstThreshold" function.
Description
No Error
Description
The handle specified by 'id' is invalid.
This function is not supported by the
module currently in use.
Chapter 3