Hpe5022_Ber_Channelicregister_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_channelIcRegister_Q

C Syntax ViStatus hpe5022_BER_channelRegister_Q(ViSession id, ViInt32 addr, ViInt32
upperBitPos, ViInt32 lowerBitPos, ViPInt32 data);
Visual Basic hpe5022_BER_channelRegister_Q(ByVal id As Long, ByVal addr As Long,
Syntax ByVal upperBitPos As Long, ByVal lowerBitPos As Long, ByRef data As Long)
As Long
Description This function returns data from the specified channel IC address.
Parameters • id
Description
Direction
• addr
Description
Direction
Value
• upperBitPos
Description
Direction
Value
• lowerBitPos
Description
Direction
Value
• data
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Chapter 3
Channel IC Configuration Function
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Specifies the address of the register.
IN
Same as 'addr' parameter in the
"hpe5022_BER_channelIcRegister" function.
Specifies the upper bit position of the register.
IN
Same as 'upperBitPos' parameter in the
"hpe5022_BER_channelIcRegister" function.
Specifies the lower bit position of the register.
IN
Same as 'lowerBitPos' parameter in the
"hpe5022_BER_channelIcRegister" function.
Returns the data in the specified bits.
OUT
Description
No Error
Function Reference
111