Hpe5022_Ber_Testsignalstring_Q - Agilent Technologies E5022B Programming Manual

Function Reference
Channel IC Configuration Function

hpe5022_BER_testSignalString_Q

C Syntax ViStatus hpe5022_BER_testSignalString_Q(ViSession id, ViInt16 testNum,
ViPString port1_str, ViPString port2_str);
Visual Basic hpe5022_BER_testSignalString_Q(ByVal id As Long, ByVal testNum As Integer,
Syntax ByVal port1_str As String, ByVal port2_str As String) As Long
Description This function returns the name of the specified test signal from the test signal 1/2
connectors on the Agilent E5039A/B front panel. See a manual for your channel
IC about signals for the detail.
Parameters • id
• testNum
• port1_str
• port2_str
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_INV_PARAMETER
102
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description Specifies the test signal number.
Direction IN
Value Same as 'testNum' parameter in the
"hpe5022_BER_selectTestSignal" function.
Description Returns the name of the signal from the Test Signal 1
connector of the E5039A/B front panel.
Direction OUT
Description Returns the name of the signal from the Test Signal 2
connector of the E5039A/B front panel.
Direction OUT
Description
No Error
Description
The handle specified by 'id' is invalid.
The parameter 'testNum' is out of range.
Chapter 3