Hpe5022_Ber_Syncwindowmode_Q - Agilent Technologies E5022B Programming Manual

Function Reference
BER Data Pattern Definition Function

hpe5022_BER_syncWindowMode_Q

C Syntax ViStatus hpe5022_BER_syncWindowMode_Q(ViSession id, ViPInt16 mode);
Visual Basic
hpe5022_BER_syncWindowMode_Q(ByVal id As Long, ByRef mode As Integer)
Syntax As Long
Description This function returns the synchronized pattern window mode (auto or manual).
This function is only available for use with the E5039C bit error test module.
Parameters
• id
• mode
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NSUP_FUNC
See Also "hpe5022_BER_syncWindowMode" on page 78"
80
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description Returns the synchronized pattern window mode (auto or
manual).
Direction OUT
Values Same as 'mode' parameter in the
"hpe5022_BER_syncWindowMode" function.
Description
No Error
Description
The resource of Agilent E5039C can not
be opened during initialization. Check if
the Agilent E5039C is included in the
rsrcArray of the "hpe5022_init" function.
The handle specified by 'id' is invalid.
This function is not supported by the
module currently in use.
Chapter 3