Hpe5022_Ber_Syncwindow_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_syncWindow_Q

C Syntax ViStatus hpe5022_BER_syncWindow_Q(ViSession id, ViPReal64 window);
Visual Basic hpe5022_BER_syncWindow_Q(ByVal id As Long, ByRef window As Double)
Syntax As Long
Description
This function returns the time to search the synchronized pattern from the read gate
start. This function is only available for use with the E5039C bit error test module.
Parameters • id
Description
Direction
• window
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NSUP_FUNC
See Also "hpe5022_BER_syncWindow" on page 75"
Chapter 3
BER Data Pattern Definition Function
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the time to search the synchronized pattern from the
read gate start point in seconds.
OUT
Description
No Error
Description
The resource of Agilent E5039C can not
be opened during initialization. Check if
the Agilent E5039C is included in the
rsrcArray of the "hpe5022_init" function.
The handle specified by 'id' is invalid.
This function is not supported by the
module currently in use.
Function Reference
77