Hpe5022_Ber_Channelboardiodata - Agilent Technologies E5022B Programming Manual

hpe5022_BER_channelBoardIoData

C Syntax ViStatus hpe5022_BER_channelBoardIoData(ViSession id, ViInt32 addr, ViInt32
data);
Visual Basic hpe5022_BER_channelBoardIoData(ByVal id As Long, ByVal addr As Long,
Syntax ByVal data As Long) As Long
Description This function writes the specified data into the specified channel board I/O
address. This function is only available for use with the E5039C bit error test
module.
Parameters • id
Description
Direction
• addr
Description
Direction
Values
• data
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_INV_ID
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Specifies the channel board I/O address.
IN
Name
hpe5022_BER_IO_ADDR_MIN
hpe5022_BER_IO_ADDR_MAX
Specifies the channel board I/O data.
IN
Function Reference
Channel IC Register Sweep Measurement
Value
0x00000
0x7ffff
Description
No Error
Description
The resource of Agilent E5039C can not
be opened during initialization. Check if
the Agilent E5039C is included in the
rsrcArray of the "hpe5022_init" function.
The handle specified by 'id' is invalid.
239