Table of Contents
Advertisement
hpe5022_BER_setup747
C Syntax
ViStatus hpe5022_BER_setup747(ViSession id, ViInt32 points, const ViReal64
offset[], ViPObject testHndl);
Visual Basic
hpe5022_BER_setup747(ByVal id As Long, ByVal points As Long, ByRef offset
Syntax
As Double, ByRef testHndl) As Long
Description
This function assigns the 747 measurement sequence to the specified test
identifier. See the "hpe5022_BER_measure747" function for details of the
sequence. This function does not execute the measurement. Measurement is
executed by the "hpe5022_measure" function with the test identifier specified in
this function.
The "hpe5022_BER_747Data_Q" function returns the measurement result.
Parameters
• id
Description
Direction
• points
Description
Direction
Values
• offset
Description
Direction
Unit
Values
• testHndl
Description
Direction
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Specifies the number of measurement points to build the 747
curve. This number must be the same as the array size of
'offset'
IN
Same as 'points' parameter in the
"hpe5022_BER_measure747" function.
Specifies the distance between the track center and the
adjacent track in array format. The array size is specified by
'points'. The data in array must be listed from outer track to
inner track.
IN
Meter
Same as 'offset' parameter in the
"hpe5022_BER_measure747" function.
Returns the test identifier. This identifier is used to execute
the 747 test by the "hpe5022_measure" function.
OUT
Function Reference
747 Measurement Function
205
Advertisement
Table of Contents
