Hpe5022_Ber_Channelicproperty_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_channelIcProperty_Q

C Syntax ViStatus hpe5022_BER_channelIcProperty_Q(ViSession id, ViInt32 property,
ViPReal64 value []);
Visual Basic hpe5022_BER_channelIcProperty_Q(ByVal id As Long, ByVal property As Long,
Syntax ByRef value As Double) As Long
Description This function returns configurations of the channel IC specified by the
"hpe5022_BER_channelIcProperty" function
Parameters • id
Description
Direction
• property
Description
Direction
• value
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_INV_PARAMETER
hpe5022_ERROR_NOT_INIT
See Also "hpe5022_BER_channelIcProperty" on page 77
Chapter 3
Channel IC Configuration Function
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Specifies the property, such as time base divider, low pass
filter, FIR filter, and so on, to specify.
IN
Returns the property values for the selected property.
OUT
Description
No Error
Description
The handle specified by 'id is invalid.
The parameter 'property' is out of range.
The resource of Agilent E5039A/B can
not be opened during initialization. Check
if Agilent E5039A/B is included in the
rsrcArray of the "hpe5022_init" function.
Function Reference
105