Hpe5022_Ber_Channelicfircoefreset - Agilent Technologies E5022B Programming Manual

Function Reference
Channel IC Configuration Function

hpe5022_BER_channelIcFirCoefReset

C Syntax ViStatus hpe5022_BER_channelIcFirCoefReset(ViSession id)
Visual Basic
hpe5022_BER_channelIcFirCoefReset(ByVal id As Long) As Long
Syntax
Description This function resets the TAP coefficient of the FIR filter. The TAP coefficient is set
to the default value. The "hpe5022_BER_channelIcProperty" function configures
the TAP coefficient of the FIR filter.
Parameters • id
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NSUP_FUNC
hpe5022_ERROR_NOT_INIT
See Also "hpe5022_BER_channelIcProperty" on page 77
86
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description
No Error
Description
The handle specified by 'id' is invalid.
This function is not available for the
installed IC.
The resource of Agilent E5039A/B can
not be opened during initialization. Check
if Agilent E5039A/B is included in the
rsrcArray of the "hpe5022_init" function.
Chapter 3