Hpe5022_Ber_Channelicdetectortype_Q - Agilent Technologies E5022B Programming Manual

Function Reference
Channel IC Configuration Function

hpe5022_BER_channelIcDetectorType_Q

C Syntax ViStatus hpe5022_BER_channelIcDetectorType _Q(ViSession id, ViPInt16
detType);
Visual Basic hpe5022_BER_channelIcDetectorType_Q(ByVal id As Long, ByRef detType As
Syntax Integer) As Long
Description This function returns the detector type specified by the
"hpe5022_BER_channelIcDetectorType" function.
Parameters • id
• DetType
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NOT_INIT
See Also "hpe5022_BER_channelIcDetectorType" on page 69
98
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description Returns the detector type.
Direction OUT
Values Same as 'type' parameter in the
"hpe5022_BER_channelIcDetectorType" function
Description
No Error
Description
The handle specified by 'id' is
invalid.
The resource of Agilent E5039A/B
can not be opened during
initialization. Check if Agilent
E5039A/B is included in the
rsrcArray of the "hpe5022_init"
function.
Chapter 3