Hpe5022_Ber_Adjacenttrackpattern_Q - Agilent Technologies E5022B Programming Manual

Function Reference
BER Data Pattern Definition Function

hpe5022_BER_adjacentTrackPattern_Q

C Syntax ViStatus hpe5022_BER_adjacentTrackPattern_Q(ViSession id, ViPInt16
backAdjType, ViPInt16 backAdjPat, ViPReal64 backAdjPos, ViPInt16
foreAdjType, ViPInt16 foreAdjPat, ViPReal64 foreAdjPos);
Visual Basic hpe5022_BER_adjacentTrackPattern_Q(ByVal id As Long, ByRef backAdjType
Syntax As Integer, ByRef backAdjPat As Integer, ByRef backAdjPos As Double, ByRef
foreAdjType As Integer, ByRef foreAdjPat As Integer, ByRef foreAdjPos As
Double) As Long
Description
This function reports the set up background and foreground adjacent track
configurations for 'On-track BER' and 'Bathtub' measurements.
Parameters • id
• backAdjType
• backAdjPat
• backAdjPos
• foreAdjType
• foreAdjPat
• foreAdjPos
50
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description Returns the type of background adjacent track.
Direction OUT
Description Returns the type of data pattern of the background adjacent
track.
Direction OUT
Description Returns the write offset position where the background
adjacent track is written.
Direction OUT
Description Returns the type of foreground adjacent track.
Direction OUT
Description Retuns the type of data pattern of the foreground adjacent
track.
Direction OUT
Description Returns the write offset position where the foreground
Chapter 3