Hpe5022_Ber_Optimizesequenceconfig - Agilent Technologies E5022B Programming Manual

hpe5022_BER_optimizeSequenceConfig

C Syntax ViStatus hpe5022_BER_optimizeSequenceConfig(ViSession id, ViInt16
seqType);
Visual Basic hpe5022_BER_optimizeSequenceConfig(ByVal id As Long, ByVal seqType As
Syntax Integer) As Long
Description This function specifies the sequence type of the optimization. The
"hpe5022_BER_optimize" function performs the optimization. The selected
sequence will be used in the optimization. When the "
the precompensation must be turned off.
Parameters • id
Description
Direction
• seqType
Description
Direction
Values
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_INV_PARAMETER
See Also "hpe5022_BER_optimize" on page 98
"hpe5022_BER_optimizeSequenceConfig_Q" on page 97
Chapter 3
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Selects the sequence type of the optimization.
IN
Name
hpe5022_SEQ_ER_WR_M
hpe5022_SEQ_WR_M
hpe5022_SEQ_M
Function Reference
Optimization Function
hpe5022_SEQ_M" is selected,
Value Description
0 Erase -> Write -> Optimize
1 Write -> Optimize
2 Optimize only
Description
No Error
Description
The handle specified by 'id' is invalid.
The parameter 'seqType' is out of range.
127