Hpe5022_Ber_Channelboardromaddressrange_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_channelBoardRomAddressRange_Q

C Syntax ViStatus hpe5022_BER_channelBoardRomAddressRange_Q(ViSession id,
ViPInt32 address_min, ViPInt32 address_max);
Visual Basic hpe5022_BER_channelBoardRomAddressRange_Q(ByVal id As Long, ByRef
Syntax address_min As Long, ByRef address_max As Integer) As Long
Description This function returns the address range of the channel board EEPROM. This
function is only available for use with the E5039C bit error test module.
Parameters • id
Description
Direction
• address_min
Description
Direction
• address_max
Description
Direction
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NSUP_FUNC
See Also "hpe5022_BER_channelBoardRomData" on page 243"
"hpe5022_BER_channelBoardRomData_Q" on page 245"
Chapter 3
Channel IC Register Sweep Measurement
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the minimum address of the channel board
EEPROM.
OUT
Returns the maximum address of the channel board
EEPROM.
OUT
Description
No Error
Description
The resource of Agilent E5039C can not
be opened during initialization. Check if
the Agilent E5039C is included in the
rsrcArray of the "hpe5022_init" function.
The handle specified by 'id' is invalid.
This function is not supported by the
module currently in use.
Function Reference
247