Hpe5022_Ber_Channelicadaptiveregister_Q - Agilent Technologies E5022B Programming Manual

hpe5022_BER_channelIcAdaptiveRegister_Q

C Syntax ViStatus hpe5022_BER_channelIcAdaptiveRegister_Q(ViSession id, ViPInt32
points, ViInt32 addr[]);
Visual Basic hpe5022_BER_channelIcAdaptiveRegister_Q(ByVal id As Long, ByRef points
Syntax As Long, ByRef addr As Long) As Long
Description This function returns the adaptive register list. This function is only available for
use with the E5039C bit error test module.
Parameters • id
Description
Direction
• points
Description
Direction
Values
• addr
Description
Direction
Values
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_NOT_INIT
hpe5022_ERROR_INV_ID
hpe5022_ERROR_NSUP_FUNC
Chapter 3
Bit Error Rate Track Profile Measurement
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Returns the number of address list.
OUT
Same as 'points' parameter in the
"hpe5022_BER_channelIcAdaptiveRegister" function.
Returns the array of adaptive register address.
OUT
Same as 'addr' parameter in the
"hpe5022_BER_channelIcAdaptiveRegister" function.
Description
No Error
Description
The resource of Agilent E5039C can not
be opened during initialization. Check if
the Agilent E5039C is included in the
rsrcArray of the "hpe5022_init" function.
The handle specified by 'id' is invalid.
This function is not supported by the
module currently in use.
Function Reference
195