Chrysler Concorde 2004 Service Manual page 1321

P1776-SOLENOID SWITCH VALVE LATCHED IN LR POSITION —
Continued
TEST
10 Using the schematics as a guide, inspect the wiring and connectors. Repair as
necessary. Pay particular attention to all power and ground circuits.
If there are no possible causes remaining, view repair.
Repair
11 The conditions necessary to set this DTC are not present at this time.
Test Drive and verify if the transmission is launching in 2nd gear and/or no TCC
engagement.
With the DRBIII , check the EATX EVENT DATA to help identify the conditions in
which the DTC was set.
Are there 2nd gear launches and/or no TCC engagement?
Yes → Disassemble and inspect the Valve Body per the Service Informa-
→ Test Complete.
No
ACTION
Replace the Powertrain Control Module per the Service Informa-
tion. WITH THE DRBIII
REPROGRAM PINION FACTOR.
Perform 42LE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
tion and repair or replace as necessary. If no problems are found
in the Valve Body, replace the Transmission Solenoid Pressure
Switch Assembly.
Perform 42LE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
TRANSMISSION - NGC
PERFORM QUICK LEARN AND
161
APPLICABILITY
All
All