Chrysler Concorde 2004 Service Manual page 1335

Hide thumbs Also See for Concorde 2004:

Table of Contents

*PRNDL FAULT CLEARING PROCEDURE

PRNDL FAULT CLEARING PROCEDURE

With the DRBIII , erase Transmission DTCs.

Cycle the ignition off, then start the vehicle.

Firmly apply the brakes and shift into Overdrive.

NOTE: Vehicle must remain in Overdrive for at least 3.0 seconds.

With the brakes firmly applied, shift slowly through all gears (PRNDL) as least three

times, pausing momentarily in each gear.

NOTE: If all the PRNDL lights box individually then the error was cleared.

Shift into park and turn the ignition off to the lock position.

Ignition on, engine not running.

With the DRBIII , read Transmission DTCs.

Does the DTC P0706 reset, or do all the PRNDL indicators remain boxed in park or

Yes → Return to the symptom list and perform diagnostics for P0706

→ Test Complete.

POSSIBLE CAUSES

CHECK SHIFTER SIGNAL.

Perform 42LE (NGC) TRANSMISSION VERIFICATION TEST -

Perform 42LE (NGC) TRANSMISSION VERIFICATION TEST -

TRANSMISSION - NGC

APPLICABILITY

Chapters

Table of Contents

300m 2004 Intrepid 2004