Toyota Camry Manual page 1413

DI–386
OBD II scan tool (excluding TOYOTA hand–held tester)
1 Check voltage between terminal STA of ECM connector and body ground.
ON
NG
2 Check for open in harness and connector between ECM and starter relay
(See page IN–31).
OK
Check and replace ECM (See page IN–31).
DIAGNOSTICS
PREPARATION:
Remove the glove compartment (See page SF–73).
CHECK:
Measure voltage between terminal STA of the ECM connector
and body ground during engine cranking.
OK:
Voltage: 6 V or more
STA (+)
OK
A07152
NG
– ENGINE (1MZ–FE)
Proceed to next circuit inspection shown on
problem symptom table (See page DI–221).
Repair or replace harness or connector.
Author : Date :
621