Toyota Camry Manual page 1502

2 Check No.2 vehicle speed sensor.
OK
Check and repair the harness and connector
between ECM and Direct clutch speed sen-
sor (See page IN–31).
DIAGNOSTICS –
PREPARATION:
Remove the Direct clutch speed sensor from transaxle.
CHECK:
(a) Measure resistance between terminals 1 and 2 of speed
sensor.
(b) Check voltage between terminals 1 and 2 of the speed
sensor when a magnet is put close to the front end of the
speed sensor then taken away quickly.
OK:
(a) Resistance: 560 ∼ 680 Ω
(b) Voltage is generated intermittently.
Magnet
HINT:
The voltage generated is extremely low.
Q08218
NG
AUTOMATIC TRANSAXLE (A541E)
Replace the Direct clutch speed sensor.
Author :
DI–475
Date :
710