Toyota Camry Manual page 1384

DTC P1335
CIRCUIT DESCRIPTION
Refer to DTC P0335 (Crankshaft Position Sensor "A" Circuit Malfunction) on page DI–287.
DTC No.
No crankshaft position sensor signal to ECM with engine
P1335
speed 1,000 rpm or more
WIRING DIAGRAM
Refer to DTC P0335 (Crankshaft Position Sensor "A" Circuit Malfunction) on page DI–287.
INSPECTION PROCEDURE
Read freeze frame data using TOYOTA hand–held tester or OBD II scan tool. Because freeze frame records
the engine conditions when the malfunction is detected, when troubleshooting it is useful for determining
whether the vehicle was running or stopped, the engine warmed up or not, the air–fuel ratio lean or rich, etc.
at the time of the malfunction.
Refer to DTC P0335 (Crankshaft Position Sensor "A" Circuit Malfunction) on page DI–287.
DIAGNOSTICS
Crankshaft Position Sensor Circuit
Malfunction (during engine running)
DTC Detecting Condition
– ENGINE (1MZ–FE)
D Open or short in crankshaft position sensor circuit
D Crankshaft position sensor
D Starter
D ECM
Author :
Trouble Area
Date :
DI–357
DI085–06
592