Toyota Camry Manual page 1350

10 Check VSV for vapor pressure sensor.
ON
VSV is ON
Air
E
G
F
F
BE6653
S00558 S00557
NG
11 Check operation of VSV for vapor pressure sensor (See page SF–62).
NG
Replace VSV and charcoal canister, and then clean the vacuum hoses between charcoal canister
and VSV for vapor pressure sensor, and VSV for vapor pressure sensor and vapor pressure sen-
sor.
DIAGNOSTICS
PREPARATION:
(a)
VSV is OFF
(b)
Air
(c)
E
G
CHECK:
Check the VSV operation when it is operated by TOYOTA
hand–held tester.
A00474
OK:
– ENGINE (1MZ–FE)
Connect the TOYOTA hand–held tester to the DLC3.
Turn the ignition switch ON and push the OBD II scan tool
or TOYOTA hand–held tester main switch ON.
Select the ACTIVE TEST mode on the TOYOTA hand–
held tester.
VSV is ON:
Air from pipe E is flowing out through pipe F.
VSV is OFF:
Air from pipe E is flowing out through pipe G.
OK Go to step 13.
OK Go to step 12.
Author :
DI–323
Date :
558