Toyota Camry Manual page 1268

2 Check voltage between terminal 1 of wire harness side connector and body
ground.
ON
1 (+)
BE6653
S05338
OK
3 Check throttle position sensor.
OK
DIAGNOSTICS –
PREPARATION:
(a) Disconnect the throttle position sensor connector.
(b) Turn the ignition switch ON.
CHECK:
Measure voltage between terminal 1 of wire harness side con-
nector and body ground.
OK:
Voltage: 4.5 ∼ 5.5 V
A00437
NG
PREPARATION:
Disconnect the throttle position sensor connector.
CHECK:
1
Measure voltage between terminals 1, 3 and 2 of throttle
position sensor.
2
OK:
3
Terminals
1 ∼ 2
S05339
3 ∼ 2
3 ∼ 2
NG
ENGINE (1MZ–FE)
Go to step 5.
Throttle valve
Fully closed
Fully open
Replace throttle position sensor.
Author :
DI–241
Resistance
2.5 ∼ 5.9 kΩ
0.2 ∼ 6.3 kΩ
2.0 ∼ 10.2 kΩ
Date :
476