DI–400
DIAGNOSTICS
–
AUTOMATIC TRANSAXLE (A140E)
8.
MANUAL SHIFTING TEST
HINT:
By this test, it can be determined whether the trouble is within
the electrical circuit or is a mechanical problem in the transaxle.
(a)
Disconnect the solenoid wire.
(b)
Inspect the manual driving operation.
Check that the shift and gear positions correspond to the
table below.
While driving, shift through the L, 2 and D positions.
Q00200
Check that the gear change corresponds to the shift posi-
tion.
Shift Position
HINT:
If the L, 2 and D gear positions are difficult to distinguish, do the
above test.
If any abnormality is found in the above test, the problem is in
the transaxle itself.
(c)
Connect the solenoid wire.
(d)
Clear out the DTC (See page DI–389).
D
2
L
R
P
Author :
Gear Position
O/D
3rd
1st
Reverse
Pawl Lock
Date :
635