Toyota Camry Manual page 1491

DI–464
NG
2 Check harness and connector between ECM and automatic transaxle solenoid
connector.
Except California, w/ Engine Immobilizer
and / or TRAC:
S2
S1
California, w/ Engine Immobilizer
and / or TRAC:
S2
S1
Q07935
D00832
Q02283
OK
DIAGNOSTICS
PREPARATION:
Disconnect the solenoid connector from the automatic trans-
axle.
CHECK:
Check the harness and connector between terminal S1 or S2
S1 of ECM and terminal S1 or S2 of solenoid connector.
OK:
S2
S1
S2
D01910
– AUTOMATIC TRANSAXLE (A541E)
OK Check and replace the ECM.
There is no open and no short circuit.
NG Repair or replace the harness or connector.
Author : Date :
699