DI–328
6
Check VSV for EVAP.
ON
OFF
EVA1
ON
VSV is ON
VSV is OFF
Air
E
F
F
NG
7
Check operation of VSV for EVAP (See page SF–58).
NG
Replace VSV and charcoal canister, and then clean the vacuum hoses between throttle body and
VSV for EVAP, and VSV for EVAP and charcoal canister.
DIAGNOSTICS
PREPARATION:
(a)
(b)
CHECK:
Check VSV function.
OK:
Air
E
A07148
–
ENGINE (1MZ–FE)
Remove the glove compartment (See page SF–73).
Turn the ignition switch ON.
(1)
Connect between terminal EVA1 of the ECM
connector and body ground (ON).
(2)
Disconnect between terminal EVP of the ECM con-
nector and body ground (OFF).
(1) VSV is ON:
Air from pipe E is flowing out through pipe F.
(2) VSV is OFF:
Air does not flow from pipe E to pipe F.
OK
Go to step 9.
OK
Go to step 9.
Author :
Date :
563