DI–206
8
Check for spark.
OK
Proceed to problem symptoms table on page
DI–221.
DIAGNOSTICS
–
ENGINE (1MZ–FE)
PREPARATION:
(a)
Remove the ignition coil or disconnect the high–tension
cord from the spark plug.
(b)
Remove the spark plug.
(c)
Install the spark plug to the ignition coil or high–tension
cord.
(d)
Disconnect the injector connector.
(e)
Hold the end about 12.5 mm (0.5 in.) from the ground.
CHECK:
P23917
Check if spark occurs while engine is being cranked.
NOTICE:
To prevent excess fuel being injected from the injectors
during this test, don't crank the engine for more than 5 ∼ 10
seconds at a time.
OK:
Spark jumps across electrode gap.
NG
Proceed to page IG–1 and continue to
troubleshoot.
Author :
Date :
441