Toyota Camry Manual page 1456

INSPECTION PROCEDURE
1 Check voltage between terminal OD1 of ECM and body ground.
ON
w/ Engine Immobiliser System
(+)
(–)
w/o Engine Immobiliser System
BE3840
Q07658
D00103
NG
2 Check voltage between terminal OD of cruise control ECU harness side connec-
tor and body ground.
ON
(–) (+)
BE3840
I00143
NG
DIAGNOSTICS
PREPARATION:
Turn the ignition switch ON.
CHECK:
Measure voltage between terminal OD1 of ECM and body
ground.
OK:
OD1
OD1
D00995
PREPARATION:
(a)
(b)
CHECK:
Measure voltage between terminal OD of cruise control ECU
harness side connector and body ground.
OK:
OD
D00057
– AUTOMATIC TRANSAXLE (A140E)
Voltage: 9 ∼ 14 V
OK Proceed to next circuit inspection shown on
matrix chart (See page DI–405).
Disconnect the cruise control ECU connector.
Turn the ignition switch ON.
Voltage: 9 ∼ 14 V
OK Check and replace the cruise control ECU.
Author :
DI–429
Date :
664