Toyota Camry Manual page 1475

DI–448
DIAGNOSTICS – AUTOMATIC TRANSAXLE (A541E)
8. MANUAL SHIFTING TEST
HINT:
With this test, it can be determined whether the trouble is within
the electrical circuit or is a mechanical problem in the transaxle.
(a) Disconnect the solenoid wire.
(b) Inspect the manual driving operation.
Check that the shift and gear positions correspond with
the table below.
While driving, shift through the L, 2 and D positions.
Q00224
Check that the gear change corresponds to the shift posi-
tion.
Shift Position
HINT:
If the L, 2 and D position gear positions are difficult to positions
are difficult to distinguish, do the following read test.
If any abnormality is found in the above test, the problem is in
the transaxle itself.
(c) Connect the solenoid wire.
(d) Cancel out the DTC (See page DI–438).
D
2
L
R
P
Author :
Gear Position
O/D
O/D
1st
Reverse
Pawl Lock
Date :
683