1
Check VSV connector for EVAP, VSV connector for vapor pressure sensor and
vapor pressure sensor connector for looseness and disconnection.
OK
2
Check vacuum hoses (1), (4), (5), (6), (7), (8) and (9) on page DI–122).
CHECK:
(a)
Check that the vacuum hose is connected correctly.
(b)
Check the vacuum hose for looseness and disconnection.
(c)
Check the vacuum hose for cracks, hole, damage and blockage.
OK
3
Check voltage between terminals VC and E2 of ECM connector
(See page DI–122, step 9).
OK
4
Check voltage between terminals PTNK and E2 of ECM connector
(See page DI–122, step 10).
NG
DIAGNOSTICS
–
ENGINE (5S–FE)
NG
Repair or connect VSV or sensor connector.
NG
Repair or replace.
NG
Check and replace ECM (See page IN–31).
OK
Go to step 6.
Author :
Date :
DI–131
366