Toyota Camry Manual page 1442

2 Check harness and connector between ECM and automatic transaxle solenoid
connector.
w/ Engine Immobiliser System
S1
S2
w/o Engine Immobiliser System
S1
S1
S2
S2
D00958
D00104
OK
DIAGNOSTICS
PREPARATION:
Disconnect the solenoid connector from the automatic trans-
axle.
CHECK:
Check the harness and connector between terminal S1 or S2
of ECM and terminal S1 or S2 of solenoid connector.
S2
OK:
S1
D00991
NG
– AUTOMATIC TRANSAXLE (A140E)
There is no open and no short circuit.
Repair or replace the harness or connector.
Author :
DI–415
Date :
650