INSPECTION PROCEDURE
TOYOTA hand–held tester
1
Connect TOYOTA hand–held tester and check operation of VSV for ACIS.
ON
VSV is ON
Air
E
E
F
F
Air Filter
BE6653
FI7073 FI7074
NG
2
Check VSV for ACIS (See page SF–60).
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
(c)
VSV is OFF
(d)
Air
CHECK:
Check operation of VSV when VSV is operated by the TOYOTA
hand–held tester.
OK:
Air Filter
A00307
–
ENGINE (1MZ–FE)
Remove the fuse cover on the instrument panel.
Connect the TOYOTA hand–held tester to the DLC3.
Turn the ignition switch ON and push the TOYOTA hand–
held tester main switch ON.
Select the ACTIVE TEST mode on the TOYOTA hand–
held tester.
VSV is ON:
Air from pipe E is flowing out through pipe F.
VSV is OFF:
Air from pipe E is flowing out through the air filter.
OK
Check for vacuum tank (See page SF–51).
NG
Replace VSV for ACIS.
Author :
DI–381
Date :
616