Toyota Camry Manual page 1306

Hide thumbs Also See for Camry:
Table of Contents

Advertisement

2
Check spark plug and spark of misfiring cylinder.
P25779
P23917
OK
DIAGNOSTICS
ENGINE (1MZ–FE)
PREPARATION:
(a)
Remove the ignition coil (See page IG–7).
(b)
Remove the spark plug.
CHECK:
(a)
Check spark plug type.
(b)
Check for carbon deposits on electrode.
(c)
Check electrode gap.
OK:
(a) Twin ground electrodes type.
Recommended spark plug:
ND
PK20TR11
NGK BKR6EKPB–11
(b) No large carbon deposit present.
Not wet with gasoline or oil.
(c) Electrode gap:
Standerd: 1.0 – 1.1 mm (0.03937 – 0.043 in.).
Maximum: 1.3 mm (0.051 in.).
PREPARATION:
(a)
Install the spark plug to the ignition coil, and connect the
A00221
ignition coil the connector.
(b)
Disconnect injector connector.
(c)
Hold the end about 12.5 mm (0.5 in.) from the ground.
CHECK:
Check if spark occurs while engine is being cranked.
NOTICE:
To prevent excess fuel being injected from the
injectors during this test, don't crank the engine for more
than 5 ∼ 10 sec. at a time.
OK:
Spark jumps across electrode gap.
NG
Replace or check ignition system
(See page IG–1).
Author :
Date :
DI–279
514

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents