Toyota Camry Manual page 1235

DI–208
TOYOTA hand–held tester display
O2S B1, S1
O2FT B1, S1
O2S B1, S2
O2S B2, S1
O2FT B2, S1
A/FS B1, S1 *3
A/FS B2, S1 *3
A/FFT B1, S1 *3
A/FFT B2, S1 *3
*1: If no conditions are specifically stated for "Idling", it means the shift lever is shift lever is at N or P position,
the A/C switch is OFF and all accessory switches are OFF.
*2: Only for California Specification vehicles, when you use the OBD II scan tool (excluding TOYOTA hand–
held tester).
*3: Only for California Specification vehicles, when you use the TOYOTA hand–held tester.
DIAGNOSTICS –
Measurement Item
Voltage Output of Oxygen Sensor
Bank 1 Sensor 1
Oxygen Sensor Fuel Trim Bank 1 Sensor 1
(Same as SHORT FT #1)
Voltage Output of Oxygen Sensor
Bank 1 Sensor 2
Voltage Output of Oxygen Sensor
Bank 2 Sensor 1
Oxygen Sensor Fuel Trim Bank 2 Sensor 1
(Same as SHORT FT #2)
Voltage Output of A/F Sensor Bank 1 Sensor 1
Voltage Output of A/F Sensor Bank 2 Sensor 1
A/F Sensor Fuel Trim Bank 1 Sensor 1
(Same as SHORT FT #1)
A/F Sensor Fuel Trim Bank 2 Sensor 1
(Same as SHORT FT #1)
ENGINE (1MZ–FE)
Idling: 0.1 ∼ 0.9 V (0.56 ∼ 0.76 V*
Driving 50 km/h (31 mph): 0.1 ∼ 0.9 V
Idling: 0.1 ∼ 0.9 V (0.56 ∼ 0.76 V*
Idling: 2.8 ∼ 3.8 V
Idling: 2.8 ∼ 3.8 V
Author :
Normal Condition*
1
)
2
0 ± 20%
)
2
0 ± 20%
O ± 20%
O ± 20%
Date :
443