Toyota Camry Manual page 1348

6 Check purge flow.
VSV is ON
VSV is OFF
S04610
S04609
NG
7 Check vacuum hoses between intake manifold and VSV for EVAP, and VSV for
EVAP and charcoal canister.
CHECK:
(a) Check that the vacuum hose is connected correctly.
(b) Check the vacuum hose for looseness and disconnection.
(c) Check the vacuum hose for cracks, hole, damage and blockage.
OK
DIAGNOSTICS – ENGINE (1MZ–FE)
PREPARATION:
(a) Connect the TOYOTA hand–held tester to the DLC3.
(b) Select the ACTIVE TEST mode on the TOYOTA
hand–held tester.
(c) Disconnect from the charcoal canister the vacuum hose
to the VSV for EVAP.
(d) Start the engine.
CHECK:
When the VSV for EVAP is operated by the TOYOTA
hand–held tester, check whether the disconnected hose ap-
plies suction to your finger.
OK:
VSV is ON:
Disconnected hose applies suction to your finger.
VSV is OFF:
Disconnected hose applies no suction to your finger.
OK Go to step 10.
A00230
NG Repair or replace.
Author : Date :
DI–321
556