Caller Lists - Siemens HiPath 1100 User Manual

Step by step
DELETE CHAR?
DELETE LINE?
VIEW STATION NO.?
VIEW NAME?
CALL?
If no match is found for the letters entered or if it is not
possible to enter letters at the moment, you will hear a
short beeping sound.
Optional
Select and confirm. It deletes the last character that
was entered If all characters are deleted, the first speed
dialing entry will be displayed again.
Optional
Select and confirm. All characters that were entered will
be deleted, and the first entry of the speed dialing direc-
tory will be displayed again.
Optional
Select and confirm.
Optional
Select and confirm.
The selected record is displayed.
Select and confirm.

Caller Lists

The last calls identified
the destination are stored in 3 call lists which can be
programmed to memorize only external calls or external
and internal calls. A system telephone with a display al-
lows you to view and select lists:
• 1 = CALLS NOT ANSWERED
• 2 = CALLS ANSWERED
• 3 = CALLS MADE
Up to 10 calls can be stored for each caller list. They are
stored in the order they were received or made. Each
call is stored with a time stamp. The list starts with the
most recent call that has not been recalled. If several
calls were from the same caller, the list will show the
time of the last call and the total number of times the
call was received.
[1] Make sure that Caller ID is activated by your carrier.
[2] The calls will not be stored if they are for hunt groups (HG) or UCD
agents.
Functions used when making calls
1
by the system and routed to
2
29