Connecting Extensions To The System's Internal Mdf (Main Distribution Frame); Hipath 1120; Figure 4-27 Distribution Of Extensions On The Hipath 1120 Main Distribution Frame - Siemens hipath 1100 Service Manual

Installation

Connecting Extensions to the System's Internal MDF (Main Distribution Frame)

Warning
!
Before powering up the system, ensure that the chassis is properly grounded. Turn
system power on or off by using the switch located on the system's AC input.
4.7 Connecting Extensions to the System's Internal MDF (Main
Distribution Frame)
Introduction
Attach cables to the system's Main Distribution Frame and route them through the
conduits and openings to reach the carrier's main telephone distribution cabinet.

4.7.1 HiPath 1120

For example,
*
The installation of a system telephone requires using a CD pair in conjunction with an a/
extension slot (see "Installing Telephone Terminals" on page 4-46).
Figure 4-27
4-32
Distribution of extensions on the HiPath 1120 Main Distribution Frame
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual