Waiting Message Server Number; Internal Voice Mail Interface - Siemens HiPath 1100 Series Programming Manual

Step by Step
...
7 9 0

Waiting Message Server Number

This setting specifies a MSN number for the Waiting
Message server.
By default, no MSN is configured.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 5
Enter a MSN (up to 20 digits).
Press this key.
#
Initial state for Programming Mode.

Internal Voice Mail Interface

This setting specifies the UCD Subscriber Group that
will interface with the internal Voice Mail Server equip-
ment.
By default, no group is configured.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 6
Enter the UCD Subscriber Group number for the Voice
7 9 9
Mail (e.g., 790)
or
Press the key to delete its function assignment.
*
Initial state for Programming Mode.
The Group must be enabled to use this feature
(code 014).
The Message Waiting Indicator is signaled by
means of a LED key on system telephones and
by a distinctive audible tone on standard
telephones. In the case of a standard telephone
enabled for CLIP FSK with MWI service the
signal can be configured to show an icon on the
display or by some other type of indication.
Programming an Extension
67