Group Call And Pickup; Picking Up A Specific Call - Siemens HOPATH 4000 Operating Instructions Manual

Making multiline calls
Step by Step
C
and
Call pickup
or
Call pickup
Call pickup
Disconnect
Direct call pickup?
110 110
110 110

Group call and pickup

If a member of a pickup group does not answer a call
within 15 seconds (depending on the system), the other
members of the team hear an alerting tone.
Telephone in the idle state:
The telephone rings. The display shows: "Call for...".
Lift the handset and press the call pickup key. You have
now taken over the call.
Press the call pickup key only.
You are in the speakerphone mode.
In the course of a call:
Press the call pickup key.
The first party waits while you are connected to the
waiting party.
Ending the waiting call – back to the first:
Press the key.

Picking up a specific call

You hear another telephone ring and you know its sta-
tion number or a colleague asks you (verbally) to pick up
a call for a specific telephone.
If you do not know the number, you can have it dis-
played (Æ page 111).
C
Lift the handset.
Select and confirm.
D
Enter the station number of the telephone for which
you wish to (or have been requested to) pick up the call.
In this way you pick up the call.