inbetriebnahme.fm
Startup
Quick Start
2.4.2
Set the Terminal Number
If the user and administrator menus are needed in the course of setup, the terminal number,
which by default is identical with the phone number, must be configured first. The terminal num-
ber input form is presented to the user/administrator right after booting, unless the Plug&Play
facility of the DLS is used. For further information about this setting, please refer to Section
3.4.1.1, "Terminal Identity". With the WBM, the teminal number is configured as follows:
4.
In the left column, select System > System Identity to open the „System Identity"dialog. En-
ter the terminal number, i. e. the SIP name / phone number.
2-6
HiPath 2000, HiPath 3000/5000, HiPath 4000 - OpenStage 60/80, Administrator Manual
A31003-01010-M11-1-7619, 29/01/2007